- Solenoid Actuated Valve
- Pilot Operated Operation
- D08 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Mechanical Options | None |
| Pilot Valve Type | CETOP 3, Standard Performance |
| Surge Suppressor/Damper Code | None |
| Crossover | All Ports Blocked |
| Response Type | Standard Response |
| Design No. | 10 |
| Coil Rating Code | B |
| Pressure Port Check Valve Code | None |
| Operation | Pilot Operated |
| Spool Indicator Switch Code | None |
| Overrides | Plain Override Solenoid Ends |
| Response Type Code | None |
| NFPA Size | D08 |
| Actuator Type | Solenoid |
| Electrical Options | None |
| Surge Suppressor/Damper | None |
| Pilot/Drain | External Pilot/Internal Drain |
| Tank Port Rating | 5000 |
| Mechanical Options Code | None |
| Indicator Lights | Yes |
| Port Restrictor Plugs | None |
| EN Code | None |
| Solenoid Energization Code | V |
| Pressure Port Check Valve Pressure | N/A |
| Manual Override | Plain Override |
| Reducer Module | N/A |
| Solenoid | Double |
| Solenoid Indicator Lights Code | L |
| Electrical Connection | Wired Terminal Block |
| Electrical Options Code | None |
| Rated Flow [Max] | 185 gal/min |
| Housing Code | W |
| Pressure [Max] | 5000 psi |
| Gauge Ports Code | None |
| Pilot Drain Code | None |
| Port T Pressure Rating | 5000 psi |
| Model No. | DG5V-8-S-4C-VM-FTWL-B-10 |
| Seal Material | Buna-N |
| Electrical Connector Code | T |
| Spool Control Modification Code | None |
| Function | 3-Position Spring Centered |
| Pilot Valve Type Code | S |
| Coil Type | Flying Leads, 1/2 in NPT Thread Wiring Housing |
| Coil Type Code | F |
| Manual Override Option Code | None |
| AC/DC | AC |
| Port Restrictor Plug Code | None |
| Spool Spring Arrangement Code | C |
| Pilot Pressure Code | None |
| Valve Type | Standard-Duty |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Gauge Port | SAE-4 |
| Reducer Module Code | None |
| Center Position | Tandem P to T |
| Spool Code | 4 |
| Weight | 35.0 LB |

