Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 10.07 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Output Torque at Rated PSI (inch/pounds) | 2664.07 in lb |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| Special Features | None |
| Port Size & Location | SAE-10 Side |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| Output Shaft Code | 01 |
| Flow [Max] | 15 gal/min |
| Flow Rate | 15 gal/min |
| Splines | 0 |
| Port Location | Side Port |
| RPM [Max] | 165 rpm, 343 rpm |
| Port Type | SAE O-Ring |
| Paint Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| Bolt Circle Dia. | 4.19 in |
| Mounting Hole Size | 0.535 in |
| Mounting Type Code | REF! |
| Duty | Standard-Duty |
| Pressure [Max] | 1900 psi |
| Material | Cast Iron |
| Special Features Hardware Code | 00 |
| Rotation | Standard Rotation |
| Motor Element | Gerotor |
| Mount Type | 2 Bolt |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Port Code | A |
| Case Drain Code | 1 |
| Inlet Pressure [Max] | 2500 psi |
| Series | S Series |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Port Size | SAE-10, 7/8-14 UNF |
| Shaft Type | Straight w/ Woodruff Key |
| Displacement (in³/rev) | 10.07 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Weight | 29.0 LB |
