Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 7.32 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Case Drain Code | 1 |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 7.32 |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Seal Material | Buna-N |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Type | SAE O-Ring |
| Port Location | Side Port |
| Material | Cast Iron |
| Motor Type | Spool Valve |
| Special Features Assembly Code | 0 |
| Mounting Hole Size | 0.565 in |
| Mounting Type Code | A |
| Output Shaft Code | 01 |
| Bolt Circle Dia. | 4.187 in |
| Duty | Standard-Duty |
| Port Size & Location | SAE-10 Side |
| Mount Type | 2 Bolt |
| Series | H Series |
| Paint Code | A |
| Mounting Holes | 0.535 in |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Splines | 0 |
| Special Features Hardware Code | 00 |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Shaft Type | Straight w/ Woodruff Key |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1800 psi |
| RPM [Min] | 469 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 14 gal/min |
| RPM [Max] | 469 rpm |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Pilot Diameter | 3.25 in |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Special Features | None |
| Motor Element | Gerotor |
| Port Code | A |
| Weight | 12.67 LB |
