Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 8.91 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mounting Type Code | A |
| Material | Cast Iron |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 02 |
| Case Drain | None |
| Mount Type | 2 Bolt |
| Displacement (in³/rev) | 8.91 |
| RPM [Min] | 385 rpm |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Bolt Circle Dia. | 4.187 in |
| Motor Element | Gerotor |
| Series | H Series |
| Flange Orientation | Standard |
| Case Drain Code | 0 |
| Pilot Diameter | 3.25 in |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 1956 in lb |
| Corrosion Resistant | No |
| Shaft Type | Splined |
| Pressure [Max] | 1700 psi |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Type | SAE O-Ring |
| Rotation | Standard Rotation |
| Flow Rate | 14 gal/min |
| Splines | 6 |
| Flow [Max] | 15 gal/min |
| Duty | Standard-Duty |
| Mounting Hole Size | 0.565 in |
| RPM [Max] | 385 rpm |
| Port Code | A |
| Mounting Holes | 0.535 in |
| Seal Material | Buna-N |
| Port Size & Location | SAE-10 Side |
| Paint Code | A |
| Special Features | None |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Weight | 12.4 LB |
