
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
Material | Cast Iron |
Special Features Hardware Code | 00 |
Corrosion Resistant | No |
Shaft Type | Splined |
Port Code | A |
Flow Rate | 15 gal/min |
Displacement (in³/rev) | 9.7 |
RPM [Max] | 353 rpm |
Pressure [Max] | 1650 psi |
Inlet Pressure [Max] | 2500 psi |
Mounting Type Code | B |
Duty | Standard-Duty |
Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
Motor Type | Spool Valve |
Seal Material | Buna-N |
Mounting Holes | 3/8-16 |
Motor Element | Gerotor |
Paint Code | A |
Case Drain | None |
Flow [Max] | 15 gal/min |
Output Shaft Code | 02 |
Port Type | SAE O-Ring |
Mounting Hole Size | 3/8 in |
Splines | 6 |
Flange Orientation | Standard |
Pilot Diameter | 1.75 in |
Special Features Assembly Code | 0 |
Case Drain Code | 0 |
Port Size & Location | SAE-10 Side |
Bolt Circle Dia. | 3 1/4 in |
Mount Type | 4 Bolt |
Shaft Size & Type | 1 in - 6T Spline |
Series | H Series |
Port Location | Side Port |
Paint/Packaging | Low Gloss Black, Individual Box |
Port Size | SAE-10, 7/8-14 UNF |
Special Features | None |
Rotation | Standard Rotation |
Weight | 12.5 LB |
