Find a Service Center
- 3 3/4" Center Distance
- 1200:1 Ratio
- Shaft Input
- Left Output
- Universal, Parallel Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Base to Shaft Center Height w/High Vert. Base Kit | 7 in |
| Output Configuration | Left Output |
| Reduction Type | Double Reduction |
| Max. Overhung Load @ 1750 rpm | 2000 lb/in |
| Box Height | 10 7/16 in |
| Box Width | 14 35/64 in |
| Torque Out @ 1750 rpm | 5700 in lb |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 1.46 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 7 1/2 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| HP @ RPM | 0.3333333 hp @ 1800 rpm |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Box Length | 8 1/2 in |
| Input Configuration | Shaft Input |
| Base to Shaft Center Height w/Low Vert. Base Kit | 5 1/4 in |
| Max. Thrust Load @ 1150 rpm | 1300 lb/in |
| Input (Shaft or Bore) Size | 5/8 in |
| Washdown Duty | No |
| Ratio | 1200:1 |
| Bolt Centers w/ Std. Base Kit (in) | 10 3/8 x 7 |
| Shaft Assembly Code | G |
| Center Distance | 3 3/4 in |
| Worm Position | Universal¦Parallel |
| Bolt Centers w/ Vertical Base Kits (in) | 13.94 x 8.00 |
| Output (Shaft or Bore) Size | 1 5/8 in |
| Motor Application | General Purpose |
| Frame | N/A |
| Torque Out @ 1150 rpm | N/A |
| Base to Centerline of Output Shaft | 6 9/16 in |
| Bolt Center | 8 1/2 in x 4 3/4 in |
| Housing Material | Cast Iron |
| Frame Size | Shaft Input, Not a C-Face |
| Family Name | WA |
| Fan Cooled | No |
| Weight | 100.1 LB |
| EAN or UPC | 781711523292 |
