Find a Service Center
- 5 5/32" Center Distance
- 15:1 Ratio
- 210TC or 250UC Frame
- w/Fan
- C-Face Coupled Input
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Bolt Center Length x Bolt Center Width | 11 in x 5 13/16 in |
| Max. Overhung Load @ 1750 rpm | 2200 lb/in |
| Box Height | 13 3/4 in |
| Input HP @ RPM | 10.5 hp @ 1150 rpm, 16.32 hp @ 1750 rpm |
| Max. Thrust Load @ RPM | 1900 lb/in @ 1150 rpm, 1900 lb/in @ 1750 rpm |
| Motor HP | 10 hp |
| Family Name | RF |
| Input (Shaft or Bore) Size | 1 3/8 in |
| Lubrication | None |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output (Shaft or Bore) Size | 2 in |
| Frame | 210TC, 250UC |
| Max. Thrust Load @ 1150 rpm | 1900 lb/in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Torque Out @ 1750 rpm | 7839 in lb |
| Bolt Centers w/ Std. Base Kit (in) | 14 1/8 x 8 3/8 |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Max. Input HP @ 100 rpm | 1.56 hp |
| Bolt Centers w/ Vertical Base Kits (in) | 18.00 x 10.00 |
| Housing Material | Cast Iron |
| Fan Cooled | Yes |
| Frame Size | 210TC, 250UC |
| Torque Out @ 1150 rpm | 7700 in lb |
| Base to Shaft Center Height w/Low Vert. Base Kit | 6.38 in |
| Center Distance | 5 5/32 in |
| Washdown Duty | No |
| Bore Code | B11 |
| Ratio | 15:1 |
| Worm Position | Universal |
| Bolt Center | 11" x 5 13/16" |
| Reduction Type | Single Reduction |
| Installed Options | Fan |
| Base to Shaft Center Height w/High Vert. Base Kit | 8.63 in |
| Box Width | 9 21/32 in |
| Base to Centerline of Input Shaft | 10 1/2 in |
| Base to Shaft Center Height w/Std. Base Kit | 6.44 in |
| Base to Centerline of Output Shaft | 5 5/16 in |
| Max. Overhung Load @ RPM | 2200 lb/in @ 1150 rpm, 2200 lb/in @ 1750 rpm |
| HP @ RPM | 10 hp @ 1800 rpm |
| Box Length | 13 1/8 in |
| Input Configuration | C-Face Coupled |
| Output Torque @ RPM | 7700 in lb @ 1150 rpm, 7839 in lb @ 1750 rpm |
| Output Configuration | Right Output |
| Motor Application | General Purpose |
| Shaft Assembly Code | J |
| Keyway Size | 5/16 x 5/32 |
| Weight | 216.1 LB |
| EAN or UPC | 781711467817 |
