Find a Service Center
- 5 5/32" Center Distance
- 15:1 Ratio
- 210TC or 250UC Frame
- w/Fan
- C-Face Coupled Input
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Base to Shaft Center Height w/High Vert. Base Kit | 8.63 in |
| Max. Overhung Load @ 1750 rpm | 2200 lb/in |
| Max. Input HP @ 100 rpm | 1.56 hp |
| Box Width | 9 21/32 in |
| Output Configuration | Right Output |
| Max. Thrust Load @ RPM | 1900 lb/in @ 1150 rpm, 1900 lb/in @ 1750 rpm |
| Frame | 210TC, 250UC |
| Motor Application | General Purpose |
| Input Configuration | C-Face Coupled |
| Housing Material | Cast Iron |
| Base to Shaft Center Height w/Low Vert. Base Kit | 6.38 in |
| Torque Out @ 1750 rpm | 7839 in lb |
| Washdown Duty | No |
| Base to Centerline of Input Shaft | 10 1/2 in |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Center Distance | 5 5/32 in |
| Output Torque @ RPM | 7700 in lb @ 1150 rpm, 7839 in lb @ 1750 rpm |
| Output (Shaft or Bore) Size | 2 in |
| HP @ RPM | 10 hp @ 1800 rpm |
| Lubrication | None |
| Ratio | 15:1 |
| Family Name | RF |
| Max. Thrust Load @ 1150 rpm | 1900 lb/in |
| Bolt Centers w/ Std. Base Kit (in) | 14 1/8 x 8 3/8 |
| Bolt Center Length x Bolt Center Width | 11 in x 5 13/16 in |
| Shaft Assembly Code | J |
| Box Length | 13 1/8 in |
| Base to Shaft Center Height w/Std. Base Kit | 6.44 in |
| Bolt Center | 11" x 5 13/16" |
| Frame Size | 210TC, 250UC |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Worm Position | Universal |
| Reduction Type | Single Reduction |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Bore Code | B11 |
| Max. Overhung Load @ RPM | 2200 lb/in @ 1150 rpm, 2200 lb/in @ 1750 rpm |
| Box Height | 13 3/4 in |
| Base to Centerline of Output Shaft | 5 5/16 in |
| Bolt Centers w/ Vertical Base Kits (in) | 18.00 x 10.00 |
| Motor HP | 10 hp |
| Input (Shaft or Bore) Size | 1 3/8 in |
| Keyway Size | 5/16 x 5/32 |
| Installed Options | Fan |
| Torque Out @ 1150 rpm | 7700 in lb |
| Fan Cooled | Yes |
| Input HP @ RPM | 10.5 hp @ 1150 rpm, 16.32 hp @ 1750 rpm |
| Weight | 216.1 LB |
| EAN or UPC | 781711467817 |
