FWC713-900-B5-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101558237

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types

Specifications

Torque Out @ 1150 rpm	N/A
Center Distance	1.33 in
Bolt Centers w/ Vertical Base Kits (in)	6.16 x 3.25
Motor HP	0.17 hp
Motor Application	General Purpose
Frame	56C
Output RPM @ 1750 rpm Input	1.94 rpm
Box Length	4 in
Shaft Assembly Code	G
Box Width	7 1/2 in
Base to Shaft Center Height w/Low Vert. Base Kit	2.31 in
Fan Cooled	No
Torque Out @ 1750 rpm	340 in lb
HP @ RPM	0.08333333 hp @ 1800 rpm
Base to Shaft Center Height w/Std. Base Kit	3.47 in
Lubrication	None
Housing Material	Cast Iron
Base to Shaft Center Height w/High Vert. Base Kit	3.56 in
Max. Thrust Load @ 1150 rpm	300 lb/in
Reduction Type	Double Reduction
Max. Overhung Load @ 1750 rpm	200 lb/in
Output (Shaft or Bore) Size	5/8 in
Input Configuration	C-Face Quilled
Ratio	900:1
Bolt Center	3 1/4" x 2"
Box Height	4 21/32 in
Frame Size	56C
Bore Code	B5
Thermal Input Horsepower @ 1750 RPM	N/A
Worm Position	Universal¦Right Angle
Input (Shaft or Bore) Size	5/8 in
Washdown Duty	No
Base to Shaft Center Height w/Vert. "J" Base Kit	2.94 in
Bolt Centers w/ Vertical "J" Base Kit (in)	6.41 x 2.00
Family Name	FWC
Keyway Size	3/16 x 3/32
Output Configuration	Left Output
Base to Centerline of Output Shaft	1 23/32 in
Base to Centerline of Input Shaft	N/A
Bolt Centers w/ Std. Base Kit (in)	4 3/8 x 3 5/16
Weight	18.1 LB
EAN or UPC	781711525319