FWC713-900-B5-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101558237

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types

Specifications

Bore Code	B5
Base to Centerline of Input Shaft	N/A
Frame	56C
Base to Shaft Center Height w/High Vert. Base Kit	3.56 in
Frame Size	56C
Bolt Centers w/ Std. Base Kit (in)	4 3/8 x 3 5/16
Input Configuration	C-Face Quilled
Washdown Duty	No
Max. Overhung Load @ 1750 rpm	200 lb/in
Base to Shaft Center Height w/Std. Base Kit	3.47 in
Shaft Assembly Code	G
Box Length	4 in
Reduction Type	Double Reduction
Bolt Center	3 1/4" x 2"
Max. Thrust Load @ 1150 rpm	300 lb/in
HP @ RPM	0.08333333 hp @ 1800 rpm
Lubrication	None
Center Distance	1.33 in
Bolt Centers w/ Vertical Base Kits (in)	6.16 x 3.25
Ratio	900:1
Motor HP	0.17 hp
Input (Shaft or Bore) Size	5/8 in
Worm Position	Universal¦Right Angle
Family Name	FWC
Output (Shaft or Bore) Size	5/8 in
Torque Out @ 1150 rpm	N/A
Bolt Centers w/ Vertical "J" Base Kit (in)	6.41 x 2.00
Base to Shaft Center Height w/Vert. "J" Base Kit	2.94 in
Output RPM @ 1750 rpm Input	1.94 rpm
Base to Centerline of Output Shaft	1 23/32 in
Housing Material	Cast Iron
Keyway Size	3/16 x 3/32
Box Width	7 1/2 in
Base to Shaft Center Height w/Low Vert. Base Kit	2.31 in
Box Height	4 21/32 in
Motor Application	General Purpose
Torque Out @ 1750 rpm	340 in lb
Fan Cooled	No
Thermal Input Horsepower @ 1750 RPM	N/A
Output Configuration	Left Output
Weight	18.1 LB
EAN or UPC	781711525319