Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life
caution
Ideal for use with filters and lubricators
Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
Output Configuration
Left Output
Box Height
6 25/64 in
Input Configuration
C-Face Quilled
HP @ RPM
0.08333333 hp @ 1800 rpm
Base to Shaft Center Height w/Low Vert. Base Kit
3.13 in
Max. Overhung Load @ 1750 rpm
700 lb/in
Bolt Centers w/ Std. Base Kit (in)
6 3/8 x 4 11/16
Base to Shaft Center Height w/Vert. "J" Base Kit
3.94 in
Family Name
FWA
Motor HP
0.17 hp
Washdown Duty
No
Center Distance
2.0625 in
Bolt Centers w/ Vertical "J" Base Kit (in)
8.63 x 2.63
Base to Centerline of Output Shaft
4 3/32 in
Frame
56C
Torque Out @ 1750 rpm
900 in lb
Box Width
9 55/64 in
Torque Out @ 1150 rpm
N/A
Bolt Center
5 in x 2 7/8 in
Input (Shaft or Bore) Size
5/8 in
Base to Centerline of Input Shaft
3 3/8 in
Lubrication
None
Ratio
1800:1
Box Length
5 13/64 in
Base to Shaft Center Height w/High Vert. Base Kit
4.88 in
Fan Cooled
No
Bore Code
B5
Housing Material
Cast Iron
Shaft Assembly Code
G
Bolt Centers w/ Vertical Base Kits (in)
8 3/8 x 4 7/8
Output (Shaft or Bore) Size
1 in
Max. Thrust Load @ 1150 rpm
700 lb/in
Base to Shaft Center Height w/Std. Base Kit
4.81 in
Output RPM @ 1750 rpm Input
0.97 rpm
Thermal Input Horsepower @ 1750 RPM
N/A
Worm Position
Universal¦Parallel
Frame Size
56C
Keyway Size
3/16 x 3/32
Reduction Type
Double Reduction
Motor Application
General Purpose
Weight
35.1 LB
EAN or UPC
884107007434
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
