Find a Service Center
- 3" Center Distance
- 15:1 Ratio
- C-Face Quilled
- Left Output
- 140TC/180C Frame
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Ratio | 15:1 |
| Family Name | F |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Frame | 140TC, 180C |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Lubrication | None |
| Motor Application | General Purpose |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Output Torque @ RPM | 1969 in lb @ 1750 rpm, 2425 in lb @ 1150 rpm |
| Bolt Center | 7 in x 4 in |
| Washdown Duty | No |
| Torque Out @ 1150 rpm | 2425 in lb |
| Input (Shaft or Bore) Size | 7/8 in |
| Housing Material | Cast Iron |
| Output Configuration | Left Output |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Use With | 730 |
| Box Height | 8 7/8 in |
| Worm Position | Universal |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Reduction Type | Single Reduction |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Fan Cooled | No |
| Frame Size | 140TC, 180C |
| Torque Out @ 1750 rpm | 1969 in lb |
| Box Width | 6 49/64 in |
| Input Configuration | C-Face Quilled |
| HP @ RPM | 3 hp @ 1800 rpm |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Input HP @ RPM | 3.41 hp @ 1150 rpm, 3.97 hp @ 1750 rpm |
| Box Length | 8 1/8 in |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Center Distance | 3 in |
| Weight | 55.1 LB |
| EAN or UPC | 781711606889 |
