Find a Service Center
- 3" Center Distance
- 15:1 Ratio
- C-Face Quilled
- Left Output
- 140TC/180C Frame
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Family Name | F |
| Motor Application | General Purpose |
| Frame Size | 140TC, 180C |
| Fan Cooled | No |
| Bolt Center | 7 in x 4 in |
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Torque Out @ 1750 rpm | 1969 in lb |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Output Configuration | Left Output |
| Housing Material | Cast Iron |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Washdown Duty | No |
| Ratio | 15:1 |
| Output Torque @ RPM | 1969 in lb @ 1750 rpm, 2425 in lb @ 1150 rpm |
| Box Length | 8 1/8 in |
| Lubrication | None |
| Box Width | 6 49/64 in |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Worm Position | Universal |
| Center Distance | 3 in |
| Input Configuration | C-Face Quilled |
| Input HP @ RPM | 3.41 hp @ 1150 rpm, 3.97 hp @ 1750 rpm |
| Torque Out @ 1150 rpm | 2425 in lb |
| HP @ RPM | 3 hp @ 1800 rpm |
| Frame | 140TC, 180C |
| Input (Shaft or Bore) Size | 7/8 in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Box Height | 8 7/8 in |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Use With | 730 |
| Reduction Type | Single Reduction |
| Weight | 55.1 LB |
| EAN or UPC | 781711606889 |
