These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pilot Valve Type
N/A
Rated Flow [Max]
21 gal/min
Electrical Connection
No Connector
Solenoid Energization Code
None
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper
None
Operation
Solenoid Operated
Actuator Type
Solenoid
Valve Type
High-Performance
Pressure [Max]
5075 psi
Cycle Rate [Max]
N/A
Coil Type Code
F
Mechanical Options
None
Electrical Options
None
Spool Shift Timing
N/A
Seal Material
Buna-N
Spool Code
2
Function Code
2
Spool Spring Arrangement Code
N
Port T Code
6
Housing Code
W
Center Position
All Ports Blocked
NFPA Size
D03
Spool Indicator Switch Code
None
Electrical Connector Code
None
AC/DC
AC
Indicator Lights
No
Voltage & Frequency
110/120 VAC – 50/60 Hz
Port T Pressure Rating
3000 psi
Solenoid Code
B
Solenoid
Double
Function
3-Position Detented
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Crossover
All Ports Blocked
Solenoid Indicator Lights Code
None
Manual Override Option Code
None
Pilot/Drain
None
Reducer Module
N/A
Response Type
Standard Response
Port Restrictor Plug Code
None
Design No.
60
Surge Suppressor/Damper Code
None
Coil Rating Code
B
Port Restrictor Plugs
None
EN Code
None
Overrides
No Overrides
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
