These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Valve Type
High-Performance
Spool Indicator Switch Code
None
Coil Type
Flying Leads, 20 mm Thread Wiring Housing
Actuator Type
Solenoid
AC/DC
AC
Solenoid Indicator Lights Code
L
Voltage & Frequency
110/120 VAC – 50/60 Hz
Manual Override Option Code
None
Surge Suppressor/Damper
None
Pressure Port Check Valve Pressure
N/A
Spool Code
6
Rated Flow [Max]
21 gal/min
Seal Material
Buna-N
Cycle Rate [Max]
N/A
Indicator Lights
Yes
Crossover
P Blocked, A or B to T
Pressure [Max]
5075 psi
Operation
Solenoid Operated
Electrical Connector Code
T
EN Code
None
Design No.
60
Coil Type Code
F
Solenoid Energization Code
None
NFPA Size
D03
Spool Spring Arrangement Code
C
Electrical Options
None
Response Type
Standard Response
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Solenoid
Double
Mechanical Options
None
Function Code
6
Overrides
No Overrides
Spool Shift Timing
N/A
Electrical Connection
Wired Terminal Block
Pilot Valve Type
N/A
Port Restrictor Plugs
None
Port T Code
6
Housing Code
J
Solenoid Code
B
Port T Pressure Rating
3000 psi
Coil Rating Code
B
Center Position
P Blocked, A & B to T
Port Restrictor Plug Code
None
Reducer Module
N/A
Function
3-Position Spring Centered
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back