These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type
DIN 43650
Manual Override Option Code
None
Actuator Type
Solenoid
Voltage & Frequency
110 VAC – 50 Hz
Center Position
All Ports Open
Response Type
Standard Response
Solenoid Indicator Lights Code
None
Port Restrictor Plug Code
None
Electrical Options
None
Pressure Port Check Valve Pressure
N/A
Operation
Solenoid Operated
Spool Shift Timing
N/A
Seal Material
Buna-N
Mechanical Options
None
Coil Rating Code
A
NFPA Size
D03
Coil Type Code
U
Cycle Rate [Max]
N/A
Design No.
60
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper
None
Solenoid Code
A
Port T Code
6
Spool Spring Arrangement Code
C
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Crossover
All Ports Open
EN Code
None
Spool Code
0
Valve Type
High-Performance
Pressure [Max]
5075 psi
Spool Indicator Switch Code
None
Overrides
No Overrides
Indicator Lights
No
Pilot Valve Type
N/A
Solenoid Energization Code
V
Solenoid
Double
Pilot/Drain
None
Function Code
0
AC/DC
AC
Function
3-Position Spring Centered
Electrical Connector Code
None
Housing Code
None
Electrical Connection
DIN 43650
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
