Find a Service Center
- D03 Pressure Reducing Valve
- Pilot Control is on Pressure Port
- Pressure Adjustment Range is 145-2,000 psi
- Screw w/Locknut Adjustment on Port B End
- SAE-4 Gage Port
description
- Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.
| Manufacturer Part No. | DGMX2-3-PP-CW-S-40 |
| Adjuster Location | Port B End |
| Family Name | Vickers D03 SystemStak™ Valves |
| Valve Type | Pressure Reducing Valve "P" Port |
| Interface | D03 |
| Model No. | DGMX2-3-PP-CW-S-40 |
| Port Control | Pressure Port |
| Gage Port | SAE-4 |
| Pilot Control | Pressure Port |
| Operating Pressure [Max] | 4500 psi |
| Pressure Adjustment Range (psi) | 145 to 2,000 |
| Adjustment Type | Screw w/ Locknut |
| Flow [Max] | 16 gal/min |
| Remote Control Port | No |
| External Drain | No |
| Design No. | 40 |
| Weight | 2.637 LB |
