Find a Service Center
- D03 Single Relief Valve
- Pressure Limited in Pressure Port
- Drained into Tank Port
- 725-4,500 psi
- Screw w/Locknut Adjustment
description
- Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.
| Pressure Limited In | Pressure Port |
| Operating Pressure [Max] | 4500 psi |
| Model No. | DGMC-3-PT-GW-41 |
| Adjustment Type, Dual | N/A |
| Remote Control Port | No |
| External Drain, Dual | N/A |
| Valve Type | Relief Valve "P" to "T" |
| Adjustment Type | Screw w/ Locknut |
| Pressure Adjustment Range, Dual (psi) | N/A |
| Design No. | 41 |
| Flow [Max] | 16 gal/min |
| Gage Port | None |
| Manufacturer Part No. | DGMC-3-PT-GW-41 |
| Pressure Limited In, Dual | N/A |
| Interface | D03 |
| External Drain | No |
| Port Drained Into, Dual | N/A |
| Port Drained Into | Tank Port |
| Relief Function | Single |
| Family Name | Vickers D03 SystemStak™ Valves |
| Pressure Adjustment Range (psi) | 725 to 4,500 |
| Weight | 2.8 LB |
