Find a Service Center
- D03 Single Relief Valve
- Pressure Limited in Pressure Port
- Drained into Tank Port
- 145-2,900 psi
- Screw w/Locknut Adjustment
description
- Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.
| External Drain, Dual | N/A |
| Design No. | 41 |
| Manufacturer Part No. | DGMC-3-PT-CW-41 |
| Remote Control Port | No |
| Valve Type | Relief Valve "P" to "T" |
| Adjustment Type | Screw w/ Locknut |
| External Drain | No |
| Pressure Limited In, Dual | N/A |
| Pressure Adjustment Range (psi) | 145 to 2,900 |
| Relief Function | Single |
| Operating Pressure [Max] | 4500 psi |
| Port Drained Into | Tank Port |
| Port Drained Into, Dual | N/A |
| Pressure Adjustment Range, Dual (psi) | N/A |
| Adjustment Type, Dual | N/A |
| Pressure Limited In | Pressure Port |
| Model No. | DGMC-3-PT-CW-41 |
| Family Name | Vickers D03 SystemStak™ Valves |
| Flow [Max] | 16 gal/min |
| Interface | D03 |
| Gage Port | None |
| Weight | 2.516 LB |
