Find a Service Center
- Flow Control Valve
- Flow Divider/Combiner Type
- FDC1-16 Series
- 12 gal/min Minimum Flow
- 47 gal/min Maximum Flow
description
- Pressure-compensated, spool-type, screw-in, flow divider/combiner cartridge. This valve is used in the dividing mode. It will take the inlet flow (port 3) and split the flow according to the ratio specified, regardless of system pressure to ports 2 and 4. In the combining mode this valve will take the inlet flows from ports 2 and 4 and combine them into port 3 according to the ratio specified.
caution
- To clean polycarbonate bowls, use mild soap and water only
- do not use cleansing agents such as acetone, benzene, carbon tetrachloride, gasoline, toluene, etc., which damage this plastic
| Series | FDC1-16 |
| Seal Material | Buna-N |
| Installation | Screw-in Cartridge |
| Recommend Filtration Level | 18/16/13 microns |
| Leakage | Standard |
| Style | Spool |
| Manufacturer Part No. | FDC1-16-0-66 |
| Type | Flow Divider/Combiner |
| No. of Housing Ports | 4 |
| Flow [Max] | 47 gal/min |
| Model No. | FDC1-16-0-66 |
| Body Type | 10 |
| No. of Valve Ports | 4 |
| Port Type | Cartridge Only |
| Pressure [Max] | 3000 psi |
| Cavity | C-16-4 |
| Housing Material | Aluminum |
| Divider Flow | 35 gal/min |
| Temperature Range [Max] | 248 °F |
| Valve Torque into Cavity | 108 to 122 Nm |
| Flow [Min] | 12 gal/min |
| Seal Kit Viton | 889638 |
| Seal Kit Buna | 889634 |
| Temperature Range [Min] | -40 °F |
| Weight | 0.78 LB |
