Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Pilot Valve Type | N/A |
| Pressure Port Check Valve Pressure | N/A |
| Pressure [Max] | 3000 psi |
| Rated Flow [Max] | 20 gal/min |
| Mechanical Options Code | None |
| Electrical Options | None |
| Electrical Connection | Ground Terminal |
| Port Restrictor Plugs | None |
| Cycle Rate [Max] | N/A |
| Pilot/Drain | None |
| Reducer Module | N/A |
| Seal Material | Buna-N |
| Mechanical Options | None |
| Overrides | No Overrides |
| Coil Rating Code | None |
| Operation | Solenoid Operated |
| Port T Pressure Rating | 1000 psi |
| Valve Type | Standard-Duty |
| Design No. | 50 |
| Spool Spring Arrangement Code | C |
| Voltage & Frequency | 460 VAC - 60 Hz |
| Actuator Type | Solenoid |
| Solenoid Air Gap Code | None |
| Center Position | P Blocked, A & B to T |
| Surge Suppressor/Damper | None |
| Model No. | DG4S4-016C-460AC-60-50 |
| Flow Direction Code | 4 |
| Solenoid | Double |
| AC/DC | AC |
| Spool Code | 6 |
| Indicator Lights | No |
| Tank Port Rating | 1000 |
| Electrical Options Code | None |
| Response Type | Standard Response |
| NFPA Size | D05 |
| Function | 3-Position Spring Centered |
| Coil Type | No Coil |
| Crossover | P Blocked, A or B to T |
| Weight | 10.0 LB |
