- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End To Center Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Reducer Module | N/A |
| Fluid Cleanliness | 19/17/14 micron |
| Performance | Standard Performance |
| No. of Stages | Single Stage |
| Flow Direction Code | 4 |
| Model No. | DG4S4-013B-B-60-LH |
| Coil Type | Flying Leads |
| Crossover | All Ports Blocked, or P & B Blocked, A to T |
| Pressure Port Check Valve Pressure | N/A |
| Temperature Range [Max] | 122 °F |
| Actuator Type | Solenoid |
| Pilot/Drain | None |
| Mounting | Subplate/Manifold Mount |
| Indicator Lights | No |
| Port Restrictor Plugs | None |
| Operation | Solenoid Operated |
| Coil Rating Code | B |
| Cycle Rate [Max] | N/A |
| Spool Spring Arrangement Code | B |
| Design No. | 60 |
| Response Time | 20 to 40 ms |
| Overrides | No Overrides |
| Function | 2-Position Spring Centered, End To Center |
| Tank Port Rating | 1000 |
| Seal Material | Buna-N |
| Solenoid | Single |
| Valve Type | Standard-Duty |
| Response Type | Standard Response |
| Surge Suppressor/Damper | None |
| Mechanical Options Code | LH |
| Rated Flow [Max] | 24 gal/min |
| Electrical Options Code | None |
| Temperature Range [Min] | 68 °F |
| Manual Override | Plain Override |
| Body Material | Gray Iron |
| Center Position | P & B Blocked, A to T |
| Spool Code | 3 |
| Leakage | Standard Performance |
| Actuation Identification | Solenoid B |
| Coil Type Code | None |
| Electrical Connection | Lead Wires w/o Terminal Box |
| Pressure [Max] | 9500 psi |
| Pilot Valve Type | N/A |
| Compatible Fluids | Petroleum Oil |
| Electrical Options | None |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Mechanical Options | Single Solenoid Reverse Assembly |
| AC/DC | AC |
| NFPA Size | D05 |
| Port T Pressure Rating | 1000 psi |
| Weight | 10.0 LB |

