Find a Service Center
- Solenoid Actuated Valve
- Pilot Operated Operation
- D08 NFPA Size
- Double Solenoid
- 3-Position, 4-Way, Spring Centered Function
description
- The DG5S8 are two-stage directional valves with an integrally-mounted DG4V3S pilot valve. These valves are used to control the direction of flow in hydraulic circuits.
compliances
- 0
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Coil Type Code | F |
| Seal Material | Buna-N |
| Function | 3-Position, 4-Way, Spring Centered |
| Center Position | All Ports Blocked |
| Pilot Drain Code | T |
| Spool Control Modification Code | None |
| NFPA Size | D08 |
| Mechanical Options | None |
| Pressure Port Check Valve Code | None |
| Pilot Pressure Code | None |
| Tank Port Rating | 5000 |
| Electrical Options Code | None |
| Pilot Valve Type | CETOP 3, High Performance |
| Port Restrictor Plugs | None |
| Fluid Cleanliness | 19/17/14 micron |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Overrides | Plain Override Solenoid Ends |
| Port T Pressure Rating | 5000 psi |
| Reducer Module Code | None |
| Actuator Type | Solenoid |
| Manual Override | Plain Override |
| Port Restrictor Plug Code | None |
| Spool Indicator Switch Code | None |
| Operation | Pilot Operated |
| Pressure Port Check Valve Pressure | N/A |
| No. of Stages | Two Stage |
| Model No. | DG5V-8-H-2C-T-M-FTWL-B-10 |
| Pilot/Drain | External Pilot/Internal Drain |
| Spool Center Condition | A Port and Double Offset sensing switch on B Port |
| Solenoid Indicator Lights Code | L |
| EN Code | None |
| Solenoid Energization Code | None |
| Manual Override Option Code | None |
| AC/DC | AC |
| Spool Spring Arrangement Code | C |
| Coil Rating Code | B |
| Pilot Valve Type Code | H |
| Electrical Options | None |
| Mounting | Subplate/Manifold Mount |
| Response Type | Standard Response |
| Compatible Fluids | Petroleum Oil |
| Valve Type | Standard-Duty |
| Surge Suppressor/Damper Code | None |
| Body Material | Gray Iron |
| Gauge Port Thread Type | 7/16 - 20 UNF, SAE Thread |
| Design No. | 10 |
| Rated Flow [Max] | 175 gal/min |
| Gauge Port | SAE-4 |
| Spool Code | 2 |
| Response Type Code | None |
| Electrical Connection | Wired Terminal Block |
| Leakage | Standard Performance |
| Surge Suppressor/Damper | None |
| Pressure [Max] | 5000 psi |
| Coil Type | Flying Leads, 1/2 in NPT Thread Wiring Housing |
| Mechanical Options Code | None |
| Gauge Ports Code | None |
| Solenoid | Double |
| Housing Code | W |
| Electrical Connector Code | T |
| Indicator Lights | Yes |
| Crossover | All Ports Blocked |
| Reducer Module | No |
| Performance | High Performance |
| Weight | 35.0 LB |
