These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Crossover
P Blocked, A or B to T
Electrical Options
None
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Design No.
60
Voltage & Frequency
110/120 VAC – 50/60 Hz
Housing Code
W
Surge Suppressor/Damper Code
None
Reducer Module
N/A
Solenoid
Double
Coil Rating Code
B
Response Type
Standard Response
Cycle Rate [Max]
N/A
Spool Code
66
Electrical Connection
Five Pin Connector
Port T Pressure Rating
3000 psi
Pilot Valve Type
N/A
Solenoid Indicator Lights Code
L
Center Position
P Blocked, A & B to T
Pilot/Drain
None
Seal Material
Buna-N
Pressure [Max]
5075 psi
Solenoid Energization Code
None
Port Restrictor Plug Code
None
Manual Override Option Code
H
Mechanical Options
None
Spool Shift Timing
N/A
Operation
Solenoid Operated
Spool Indicator Switch Code
None
Coil Type Code
F
Electrical Connector Code
PA5
NFPA Size
D03
Pressure Port Check Valve Pressure
N/A
AC/DC
AC
Function
3-Position Spring Centered
Spool Spring Arrangement Code
C
Port Restrictor Plugs
None
Function Code
66
EN Code
None
Overrides
No Overrides
Port T Code
6
Solenoid Code
B
Valve Type
High-Performance
Indicator Lights
Yes
Rated Flow [Max]
21 gal/min
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back