- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered, Double End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Operation | Solenoid Operated |
| NFPA Size | D05 |
| Coil Rating Code | D |
| Actuator Type | Solenoid |
| Design No. | 60 |
| Surge Suppressor/Damper | None |
| Electrical Options Code | W |
| Center Position | All Ports Blocked |
| Voltage & Frequency | 220 VAC - 50 Hz |
| Flow Direction Code | 4 |
| Pressure Port Check Valve Pressure | N/A |
| Function | 3-Position Spring Centered, Double End |
| Spool Spring Arrangement Code | C |
| Seal Material | Buna-N |
| Spool Code | 2 |
| Electrical Options | None |
| Coil Type Code | None |
| Valve Type | Standard-Duty |
| Tank Port Rating | 1000 |
| Mechanical Options | None |
| Crossover | All Ports Blocked |
| Port T Pressure Rating | 1000 psi |
| Reducer Module | N/A |
| Rated Flow [Max] | 25 gal/min |
| Model No. | DG4S4W-012C-D-60 |
| Solenoid | Double |
| Overrides | No Overrides |
| Pilot/Drain | None |
| Indicator Lights | No |
| Port Restrictor Plugs | None |
| Response Type | Standard Response |
| Cycle Rate [Max] | N/A |
| AC/DC | AC |
| Pressure [Max] | 3600 psi |
| Mechanical Options Code | None |
| Electrical Connection | KU W/ Deutsch Connector |
| Coil Type | Flying Leads |
| Pilot Valve Type | N/A |
| Weight | 10.0 LB |

