Find a Service Center
- Flow Control Valve
- Flow Divider/Combiner Type
- FDC1-16 Series
- 12 gal/min Minimum Flow
- 45 gal/min Maximum Flow
description
- Pressure-compensated, spool-type, screw-in, flow divider/combiner cartridge. This valve is used in the dividing mode. It will take the inlet flow (port 3) and split the flow according to the ratio specified, regardless of system pressure to ports 2 and 4. In the combining mode this valve will take the inlet flows from ports 2 and 4 and combine them into port 3 according to the ratio specified.
caution
- Read and observe the special usage warning on the label
- Do not apply while equipment is energized
- Check local regulations for special storage requirements
| Type | Flow Divider/Combiner |
| Divider Flow | 30 gal/min |
| Cavity | C-16-4 |
| Flow [Min] | 12 gal/min |
| Seal Material | Buna-N |
| Temperature Range [Max] | 248 °F |
| Manufacturer Part No. | FDC1-16-0-55 |
| Seal Kit Buna | 889634 |
| Installation | Screw-in Cartridge |
| Pressure [Max] | 3000 psi |
| Seal Kit Viton | 889638 |
| No. of Valve Ports | 4 |
| Body Type | 10 |
| Recommend Filtration Level | 18/16/13 microns |
| No. of Housing Ports | 4 |
| Housing Material | Aluminum |
| Flow [Max] | 45 gal/min |
| Style | Spool |
| Leakage | Standard |
| Model No. | FDC1-16-0-55 |
| Port Type | Cartridge Only |
| Valve Torque into Cavity | 108 to 122 Nm |
| Series | FDC1-16 |
| Temperature Range [Min] | -40 °F |
| Weight | 0.78 LB |
