These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Single
Port T Code
2
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Electrical Connector Code
None
Port T Pressure Rating
150 psi
Pressure Port Check Valve Pressure
N/A
Spool Spring Arrangement Code
A
Mechanical Options
None
Port Restrictor Plugs
None
Design No.
60
Cycle Rate [Max]
N/A
Coil Type Code
F
Overrides
No Overrides
Surge Suppressor/Damper
None
EN Code
None
Valve Type
High-Performance
Operation
Solenoid Operated
Solenoid Code
B
AC/DC
AC
Rated Flow [Max]
21 gal/min
NFPA Size
D03
Crossover
All Ports Blocked
Function Code
2
Port Restrictor Plug Code
None
Spool Code
2
Pilot Valve Type
N/A
Electrical Connection
No Connector
Reducer Module
N/A
Solenoid Indicator Lights Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Coil Rating Code
B
Spool Indicator Switch Code
S5
Actuator Type
Solenoid
Housing Code
W
Electrical Options
None
Function
2-Position Spring Offset, End to End
Spool Shift Timing
N/A
Indicator Lights
No
Pressure [Max]
5075 psi
Manual Override Option Code
None
Response Type
Standard Response
Solenoid Energization Code
None
Center Position
All Ports Blocked
Seal Material
Buna-N
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back