
- Solenoid Valve
- 4-Way, Spool Valve Type
- Cartridge Only Port Type
- Direct Acting Actuation
- Spool
description
- Four-way, two-position, direct-acting, spool-type, screw-in cartridge solenoid valve. In the de-energized position, all ports are blocked. In the energized position, port 2 is open to port 3 and port 1 is open to port 4.
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
Cavity | C-10-4 |
Filter Option | None |
Watt Rating | 23 W |
Valve Material | Cartridge only |
Recommend Filtration Level | 18/16/13 microns |
Poppet/Spool | Spool |
Installation | Screw-in Cartridge |
Coil Series | N/A |
Seal Kit Viton | 566080 |
Operation | Solenoid Operated |
Temperature Range [Min] | -40 °F |
No. of Valve Ports | 4 |
Valve Type | 4-Way, Spool |
Housing No. | N/A |
Seal Material | Buna-N |
Valve Torque into Cavity | 47 to 54 Nm |
Model No. | SV5-10-4-0-00 |
Temperature Range [Max] | 248 °F |
Manual Override | No Manual Override |
No. of Housing Ports | 4 |
Bi-Directional (2-Way Valves) | No |
Port Type | Cartridge Only |
Pressure [Max] | 3000 psi |
Valve Voltage Rating | No Coil |
Flow [Max] | 6 gal/min |
Connector Type | Yazaki X-Type 2P Male, On Wire Leads |
Actuation | Direct Acting |
Housing Material | Steel |
Seal Kit Buna | 889625 |
Size Designation | 10 |
Cartridge Valve Series | SV5-10-4 |
Series | J Series |
Weight | 1.0 LB |
