Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Function | 3-Position Spring Centered |
| Coil Type | No Coil |
| Actuator Type | Solenoid |
| Voltage & Frequency | 460 VAC - 60 Hz |
| Pilot/Drain | None |
| Design No. | 50 |
| Reducer Module | N/A |
| Solenoid Air Gap Code | None |
| Tank Port Rating | 1000 |
| Port T Pressure Rating | 1000 psi |
| Electrical Options | None |
| Mechanical Options | None |
| Model No. | DG4S4-016C-460AC-60-50 |
| Pilot Valve Type | N/A |
| Flow Direction Code | 4 |
| Seal Material | Buna-N |
| Electrical Options Code | None |
| Center Position | P Blocked, A & B to T |
| Rated Flow [Max] | 20 gal/min |
| Pressure [Max] | 3000 psi |
| Mechanical Options Code | None |
| AC/DC | AC |
| Cycle Rate [Max] | N/A |
| Surge Suppressor/Damper | None |
| NFPA Size | D05 |
| Electrical Connection | Ground Terminal |
| Crossover | P Blocked, A or B to T |
| Response Type | Standard Response |
| Valve Type | Standard-Duty |
| Operation | Solenoid Operated |
| Overrides | No Overrides |
| Coil Rating Code | None |
| Port Restrictor Plugs | None |
| Spool Spring Arrangement Code | C |
| Indicator Lights | No |
| Pressure Port Check Valve Pressure | N/A |
| Spool Code | 6 |
| Solenoid | Double |
| Weight | 10.0 LB |
