These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Manual Override Option Code
None
Operation
Solenoid Operated
Coil Type Code
F
Electrical Connector Code
T
EN Code
None
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
C
Pressure Port Check Valve Pressure
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Solenoid Energization Code
None
Rated Flow [Max]
21 gal/min
Valve Type
High-Performance
Coil Rating Code
B
Actuator Type
Solenoid
Indicator Lights
Yes
Solenoid Indicator Lights Code
L
Reducer Module
N/A
Solenoid
Double
Port T Pressure Rating
3000 psi
Spool Shift Timing
N/A
Solenoid Code
B
Function Code
2
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
NFPA Size
D03
Port T Code
6
Cycle Rate [Max]
N/A
Spool Code
2
Housing Code
W
AC/DC
AC
Function
3-Position Spring Centered
Center Position
All Ports Blocked
Overrides
No Overrides
Response Type
Standard Response
Seal Material
Buna-N
Port Restrictor Plugs
1 mm Diameter - P Port
Crossover
All Ports Blocked
Pilot Valve Type
N/A
Design No.
60
Electrical Connection
Wired Terminal Block
Pilot/Drain
None
Electrical Options
None
Surge Suppressor/Damper
None
Pressure [Max]
5075 psi
Port Restrictor Plug Code
P10
Surge Suppressor/Damper Code
None
Mechanical Options
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back