These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Shift Timing
N/A
Solenoid Code
BL
Design No.
60
Solenoid
Double
Function
3-Position Spring Centered
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
AC/DC
AC
Rated Flow [Max]
21 gal/min
Coil Type Code
F
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Solenoid Energization Code
None
Function Code
2
Port T Code
6
Mechanical Options
None
Housing Code
W
Pilot Valve Type
N/A
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Coil Rating Code
BL
Response Type
Standard Response
Electrical Connection
Wired Terminal Block
Manual Override Option Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz, Low Power Coil
Indicator Lights
No
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
C
Reducer Module
N/A
Port T Pressure Rating
3000 psi
Pressure [Max]
5075 psi
Electrical Connector Code
T
EN Code
None
Surge Suppressor/Damper Code
None
Valve Type
High-Performance
Port Restrictor Plug Code
None
Pilot/Drain
None
Spool Code
2
NFPA Size
D03
Port Restrictor Plugs
None
Solenoid Indicator Lights Code
None
Seal Material
Buna-N
Electrical Options
None
Cycle Rate [Max]
N/A
Overrides
No Overrides
Center Position
All Ports Blocked
Crossover
All Ports Blocked
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back