These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure Port Check Valve Pressure
N/A
Function Code
8
Function
3-Position Spring Centered
Port Restrictor Plug Code
None
Voltage & Frequency
24 VDC, Low Power Coil
EN Code
None
Coil Rating Code
HL
Port T Code
7
Pressure [Max]
5075 psi
Spool Code
8
AC/DC
DC
Cycle Rate [Max]
N/A
Seal Material
Buna-N
Pilot/Drain
None
Operation
Solenoid Operated
Response Type
Standard Response
Design No.
61
Manual Override Option Code
None
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Spool Spring Arrangement Code
C
Solenoid Indicator Lights Code
L
Port T Pressure Rating
3000 psi
Solenoid Energization Code
V
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Overrides
No Overrides
Mechanical Options
None
Center Position
P to T, A & B Blocked
Housing Code
W
Valve Type
High-Performance
Electrical Options
None
Rated Flow [Max]
21 gal/min
Actuator Type
Solenoid
Coil Type Code
F
Pilot Valve Type
N/A
Electrical Connector Code
T
Indicator Lights
Yes
Port Restrictor Plugs
None
Reducer Module
N/A
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
Crossover
All Ports Open, Restricted
Solenoid Code
HL
NFPA Size
D03
Solenoid
Double
Electrical Connection
Wired Terminal Block
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back