These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Double
Seal Material
Buna-N
Design No.
61
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Overrides
No Overrides
Reducer Module
N/A
Port T Code
6
Pilot/Drain
None
Housing Code
W
Pressure Port Check Valve Pressure
N/A
Solenoid Code
D
Port T Pressure Rating
3000 psi
Valve Type
High-Performance
Spool Shift Timing
N/A
Coil Rating Code
D
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Function Code
8
Electrical Options
None
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
C
Indicator Lights
No
EN Code
None
Voltage & Frequency
220/240 VAC – 50/60 Hz
Surge Suppressor/Damper Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Center Position
P to T, A & B Blocked
Function
3-Position Spring Centered
Coil Type Code
F
Surge Suppressor/Damper
None
Pilot Valve Type
N/A
Solenoid Energization Code
V
Electrical Connection
No Connector
NFPA Size
D03
Pressure [Max]
5075 psi
AC/DC
AC
Mechanical Options
None
Electrical Connector Code
None
Solenoid Indicator Lights Code
None
Manual Override Option Code
None
Port Restrictor Plugs
None
Operation
Solenoid Operated
Crossover
All Ports Open, Restricted
Port Restrictor Plug Code
None
Spool Code
8
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back