These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Indicator Lights
Yes
Seal Material
Buna-N
Port T Pressure Rating
3000 psi
Pressure Port Check Valve Pressure
N/A
Rated Flow [Max]
21 gal/min
Mechanical Options
None
AC/DC
AC
Actuator Type
Solenoid
Pressure [Max]
5075 psi
Surge Suppressor/Damper
None
NFPA Size
D03
Spool Indicator Switch Code
None
Center Position
P Blocked, A & B to T
Port T Code
6
Spool Code
66
EN Code
None
Cycle Rate [Max]
N/A
Overrides
No Overrides
Electrical Connection
Wired Terminal Block
Solenoid Code
B
Solenoid Indicator Lights Code
L
Surge Suppressor/Damper Code
None
Manual Override Option Code
None
Spool Shift Timing
N/A
Pilot/Drain
None
Solenoid
Double
Valve Type
High-Performance
Design No.
60
Reducer Module
N/A
Spool Spring Arrangement Code
C
Coil Type Code
F
Response Type
Standard Response
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot Valve Type
N/A
Coil Rating Code
B
Housing Code
W
Function
3-Position Spring Centered
Electrical Options
None
Function Code
66
Electrical Connector Code
T
Operation
Solenoid Operated
Port Restrictor Plugs
None
Crossover
P Blocked, A or B to T
Port Restrictor Plug Code
None
Solenoid Energization Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back