
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered, Double End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Response Type | Standard Response |
Mechanical Options | None |
Design No. | 60 |
Valve Type | Standard-Duty |
Electrical Options | None |
Model No. | DG4S4W-012C-D-60 |
Center Position | All Ports Blocked |
Pilot/Drain | None |
Reducer Module | N/A |
Surge Suppressor/Damper | None |
Coil Type Code | None |
Coil Type | Flying Leads |
Flow Direction Code | 4 |
AC/DC | AC |
Tank Port Rating | 1000 |
Operation | Solenoid Operated |
Pilot Valve Type | N/A |
Actuator Type | Solenoid |
Port Restrictor Plugs | None |
NFPA Size | D05 |
Electrical Options Code | W |
Pressure Port Check Valve Pressure | N/A |
Function | 3-Position Spring Centered, Double End |
Crossover | All Ports Blocked |
Spool Spring Arrangement Code | C |
Electrical Connection | KU W/ Deutsch Connector |
Rated Flow [Max] | 25 gal/min |
Coil Rating Code | D |
Voltage & Frequency | 220 VAC - 50 Hz |
Solenoid | Double |
Pressure [Max] | 3600 psi |
Cycle Rate [Max] | N/A |
Spool Code | 2 |
Seal Material | Buna-N |
Mechanical Options Code | None |
Port T Pressure Rating | 1000 psi |
Overrides | No Overrides |
Indicator Lights | No |
Weight | 10.0 LB |
