These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connection
DIN 43650
Housing Code
None
Solenoid Indicator Lights Code
None
Pressure Port Check Valve Pressure
N/A
Valve Type
High-Performance
Function Code
0
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Cycle Rate [Max]
N/A
Crossover
All Ports Open
Port Restrictor Plug Code
None
Seal Material
Buna-N
NFPA Size
D03
Coil Rating Code
C
Spool Code
0
Spool Spring Arrangement Code
C
Solenoid Energization Code
None
Pilot Valve Type
N/A
Solenoid
Double
Coil Type Code
U
EN Code
None
Operation
Solenoid Operated
Voltage & Frequency
220 VAC – 50 Hz
Function
3-Position Spring Centered
Solenoid Code
C
Manual Override Option Code
H
Pressure [Max]
5075 psi
Coil Type
DIN 43650
Design No.
60
Electrical Connector Code
None
Overrides
No Overrides
AC/DC
AC
Indicator Lights
No
Pilot/Drain
None
Response Type
Standard Response
Port T Pressure Rating
3000 psi
Port T Code
6
Surge Suppressor/Damper Code
None
Electrical Options
None
Reducer Module
N/A
Spool Indicator Switch Code
None
Port Restrictor Plugs
None
Spool Shift Timing
N/A
Rated Flow [Max]
21 gal/min
Mechanical Options
None
Center Position
All Ports Open
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
