Find a Service Center
Alternate Products
- Cam Follower
- 4" OD Straight Roller
- 1 1/4" Standard Stud
- 1 1/4-12 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| End Type | Metal Plug |
| Inch/Metric | Inch |
| Stud Length | 2.75 in |
| Stud Dia. | 1.25 in |
| Roller Width | 2 in |
| Enclosure | Sealed |
| Material | Steel |
| Threads per Inch | 12 |
| Thread Size | 1 1/4 |
| Roller Dia. | 4 in |
| Bearing Type | Tapered Roller Bearing |
| Stud Type | Standard |
| Thread Type | UNF |
| Dynamic Load Rating | 14300 lbf |
| Roller Type | Straight |
| Weight | 7.1 LB |
| EAN or UPC | 651041149168 |
