Find a Service Center
Alternate Products
- Cam Follower
- 6" OD Flanged Roller
- 2 1/2" Standard Stud
- 2 1/2-12 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Thread Size | 2 1/2 |
| Stud Length | 5 1/2 in |
| Roller Dia. | 6 in |
| Stud Dia. | 2 1/2 in |
| Threads per Inch | 12 |
| Flange Thickness | 23/32 in |
| Roller Type | Flanged |
| Roller Width | 3 in |
| Dynamic Thrust Load Rating | 14200 lbf |
| Inch/Metric | Inch |
| Material | Steel |
| Dynamic Load Rating | 35800 lbf |
| End Type | Metal Plug |
| Enclosure | Sealed |
| Thread Type | UNF |
| Stud Type | Standard |
| Static Capacity | 62000 lbf |
| Bearing Type | Tapered Roller Bearing |
| Weight | 29.5 LB |
| EAN or UPC | 651041148826 |
