Find a Service Center
Alternate Products
- Cam Follower
- 4 1/2" OD Flanged Roller
- 1 1/4" Standard Stud
- 1 1/4-12 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Inch/Metric | Inch |
| Dynamic Thrust Load Rating | 5790 lbf |
| Enclosure | Sealed |
| Threads per Inch | 12 |
| Flange Thickness | 0.59375 in |
| Thread Size | 1 1/4 |
| Material | Steel |
| Roller Dia. | 4 1/2 in |
| Stud Length | 2.75 in |
| Roller Width | 2 in |
| Thread Type | UNF |
| Stud Dia. | 1.25 in |
| Roller Type | Flanged |
| Stud Type | Standard |
| Bearing Type | Tapered Roller Bearing |
| End Type | Metal Plug |
| Dynamic Load Rating | 14300 lbf |
| Static Capacity | 16000 lbf |
| Weight | 9.9 LB |
| EAN or UPC | 651041149311 |
