Find a Service Center
Alternate Products
- Cam Follower
- 2 3/4" OD Flanged Roller
- 1" Eccentric Stud
- 1-14 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Roller Dia. | 2 3/4 in |
| Threads per Inch | 14 |
| Thread Size | 1 |
| Stud Length | 2.25 in |
| End Type | Metal Plug |
| Roller Width | 1 11/16 in |
| Inch/Metric | Inch |
| Roller Type | Flanged |
| Dynamic Load Rating | 5120 lbf |
| Stud Dia. | 1 in |
| Flange Thickness | 0.59375 in |
| Static Capacity | 3120 lbf |
| Enclosure | Sealed |
| Material | Steel |
| Dynamic Thrust Load Rating | 2680 lbf |
| Bearing Type | Ball Bearing |
| Thread Type | UNF |
| Stud Type | Eccentric |
| Weight | 3.2 LB |
| EAN or UPC | 651041207646 |
