
- Radial Shaft Seal
- 960 mm Shaft Diameter
- 1040 mm Housing Bore Diameter
- 23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Temperature Range [Min] | -40 °F |
Spring Material | Carbon Steel Garter |
Construction | HDS1 |
Shaft Dia. | 960 mm |
Cover/Compensation Ring/Plate Required | No |
Housing Bore Dia. | 1040 mm |
Pressure | 10 psi |
Case Construction | Steel Case w/Inner Case |
Seal Application | General Purpose |
Inch/Metric | Metric |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Lip Style | Internal |
Seal Design | Bonded Design |
Temperature Range [Max] | 250 °F |
Lip Material | Nitrile |
Lip Type | Non-Split |
Weight | 21.064 LB |
EAN or UPC | 85311147811 |
