
- Radial Shaft Seal
- 940 mm Shaft Diameter
- 1000 mm Housing Bore Diameter
- 25 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Housing Bore Dia. | 1000 mm |
Temperature Range [Max] | 250 °F |
Seal Design | Bonded Design |
Seal Application | General Purpose |
Cover/Compensation Ring/Plate Required | No |
Lip Style | Internal |
Construction | HDS1 |
Shaft Dia. | 940 mm |
Lip Type | Non-Split |
Spring Material | Carbon Steel Garter |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Pressure | 10 psi |
Case Construction | Steel Case w/Inner Case |
Surface Speed [Nom] | 5,000 ft/min |
Inch/Metric | Metric |
Lip Material | Duralip (Carboxylated Nitrile) |
Temperature Range [Min] | -40 °F |
Weight | 19.924 LB |
EAN or UPC | 85311902403 |
