
- 65 mm ID x 140 mm OD x 33 mm Wide
- Open
- ABEC 1
- Standard Cage
- Normal Clearance
description
- Angular contact ball bearings have raceways in the inner and outer rings, which are displaced with respect to each other in the direction of the bearing axis. Designed to accommodate both radial and axial loads (in one direction).
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
Seal Type | Unsealed |
Lubricant | Oil Preservative |
Locking Device | No Locking Device |
Snap Ring | No Snap Ring |
O.D. Type | Straight |
Radial Internal Clearance Specification | Normal Clearance |
Preload Level | Medium |
Inner Ring Width | 1.3 in, 33 mm |
O.D. | 140 mm |
Cage Type | Plastic |
Precision Level | Standard (ABEC 1) |
Seal Material | None |
No. in Set | Single Bearing |
Enclosure | Open |
Ball Material | Steel |
Bearing Type | Angular Contact |
Radial Internal Clearance | Normal |
Series | 7300 |
Limiting Speed - Grease | 4300 rpm |
Limiting Speed - Oil | 5600 rpm |
Material | Steel |
Outer Ring Width | 33 mm |
Cage Material | Polyamide (Molded Nylon) |
Bearing Design | Universal Mounting |
Precision | Standard |
Flush Ground | No |
Inch/Metric | Metric Bore |
Width | 1.3 in, 33 mm |
icNumber | 7695821 |
I.D. | 65 mm |
Capacity | High Capacity |
Rows of Balls | Single |
Bore Type | Round Bore |
Contact Angle | 40° |
Weight | 4.74 LB |
EAN or UPC | 7316577611383 |
