Find a Service Center
Alternate Products
- 55 mm ID x 120 mm OD x 29 mm Wide
- Open
- ABEC 1
- Standard Cage
- Normal Clearance
description
- Angular contact ball bearings have raceways in the inner and outer rings, which are displaced with respect to each other in the direction of the bearing axis. Designed to accommodate both radial and axial loads (in one direction).
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Bore Type | Round Bore |
| Radial Internal Clearance Specification | Normal Clearance |
| Limiting Speed - Grease | 4800 rpm |
| Snap Ring | No Snap Ring |
| Cage Material | Polyamide (Molded Nylon) |
| Capacity | High Capacity |
| Seal Material | None |
| No. in Set | Single Bearing |
| Bearing Type | Angular Contact |
| Outer Ring Width | 29 mm |
| Inch/Metric | Metric Bore |
| Preload Level | Light |
| I.D. | 55 mm |
| Precision | Standard |
| Locating | Retaining Slot |
| Series | 73 |
| O.D. | 120 mm |
| Enclosure | Open |
| Rows of Balls | Single |
| Seal Type | Unsealed |
| Radial Internal Clearance | Normal |
| Bearing Design | Universal Mounting |
| Width | 1.14 in, 29 mm |
| Ball Material | Steel |
| Limiting Speed - Oil | 6300 rpm |
| Cage Type | Plastic |
| Lubricant | Oil Preservative |
| Flush Ground | No |
| O.D. Type | Straight |
| icNumber | 7695843 |
| Contact Angle | 40° |
| Locking Device | No Locking Device |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Inner Ring Width | 1.14 in, 29 mm |
| Weight | 3.029 LB |
| EAN or UPC | 7316570691023 |
