Find a Service Center
- Radial Shaft Seal
- 680 mm Shaft Diameter
- 740 mm Housing Bore Diameter
- 30 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Cover/Compensation Ring/Plate Required | No |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Construction | HDS2 |
| Temperature Range [Min] | -40 °F |
| Pressure | 15 psi |
| Spring Material | Carbon Steel Garter |
| Shaft Dia. | 680 mm |
| Seal Design | Molded Design |
| Inch/Metric | Metric |
| Lip Style | Internal |
| Temperature Range [Max] | 250 °F |
| Lip Material | Nitrile |
| Case Construction | Steel Case w/Inner Case |
| Housing Bore Dia. | 740 mm |
| Seal Application | General Purpose |
| Lip Type | Non-Split |
| Weight | 10.768 LB |
| EAN or UPC | 85311141024 |
