
- Radial Shaft Seal
- 630 mm Shaft Diameter
- 670 mm Housing Bore Diameter
- 20 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Pressure | 10 psi |
Housing Bore Dia. | 670 mm |
Case Construction | Steel Case w/Inner Case |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Cover/Compensation Ring/Plate Required | No |
Shaft Dia. | 630 mm |
Seal Design | Bonded Design |
Lip Type | Non-Split |
Temperature Range [Min] | -40 °F |
Lip Material | Nitrile |
Temperature Range [Max] | 250 °F |
Construction | HDS1 |
Lip Style | Internal |
Seal Application | General Purpose |
Inch/Metric | Metric |
Spring Material | Carbon Steel Garter |
Weight | 11.491 LB |
EAN or UPC | 85311139212 |
