Find a Service Center
- Radial Shaft Seal
- 238.125 mm Shaft Diameter
- 288.925 mm Housing Bore Diameter
- 22.225 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Seal Design | Assembled Design |
| Inch/Metric | Metric |
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Case Construction | Steel Case w/Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Surface Speed [Nom] | 5,000 ft/min |
| Construction | HDS1 |
| Temperature Range [Max] | 400 °F |
| Housing Bore Dia. | 288.925 mm |
| Lip Type | Non-Split |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Shaft Dia. | 238.125 mm |
| Temperature Range [Min] | -40 °F |
| Lip Material | Fluoroelastomer - Viton |
| Pressure | 10 psi |
| Weight | 4.141 LB |
| EAN or UPC | 85311169585 |
