
- Radial Shaft Seal
- 520 mm Shaft Diameter
- 560 mm Housing Bore Diameter
- 20 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
Construction | HDS1 |
Pressure | 10 psi |
Temperature Range [Min] | -40 °F |
Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
Seal Application | General Purpose |
Inch/Metric | Metric |
Spring Material | Carbon Steel Garter |
Shaft Dia. | 520 mm |
Lip Type | Non-Split |
Temperature Range [Max] | 400 °F |
Lip Style | Internal |
Lip Material | Fluoroelastomer - Viton |
Cover/Compensation Ring/Plate Required | No |
Housing Bore Dia. | 560 mm |
Seal Design | Bonded Design |
Case Construction | Steel Case w/Inner Case |
Weight | 10.056 LB |
EAN or UPC | 85311134163 |
