Find a Service Center
- Radial Shaft Seal
- 1095.38 mm Shaft Diameter
- 1133.48 mm Housing Bore Diameter
- 6.02 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Housing Bore Dia. | 1133.48 mm |
| Temperature Range [Min] | -40 °F |
| Shaft Dia. | 1095.38 mm |
| Inch/Metric | Metric |
| Construction | HDS1 |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Lip Type | Non-Split |
| Spring Material | Carbon Steel Garter |
| Lip Style | Internal |
| Surface Speed [Nom] | 5,000 ft/min |
| Temperature Range [Max] | 250 °F |
| Lip Material | Nitrile |
| Cover/Compensation Ring/Plate Required | No |
| Case Construction | Steel Case w/Inner Case |
| Seal Design | Bonded Design |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Weight | 22.887 LB |
| EAN or UPC | 85311149877 |
