Find a Service Center
- Radial Shaft Seal
- 400 mm Shaft Diameter
- 450 mm Housing Bore Diameter
- 17.5 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Lip Style | Internal |
| Inch/Metric | Metric |
| Temp Description | w/4 Lugs |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Temperature Range [Max] | 250 °F |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile |
| Pressure | 15 psi |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Non-Split |
| Seal Design | Molded Design |
| Construction | HDS2 |
| Surface Speed [Nom] | 5,000 ft/min |
| Shaft Dia. | 400 mm |
| Case Construction | Steel Case w/Inner Case |
| Housing Bore Dia. | 450 mm |
| Weight | 5.983 LB |
| EAN or UPC | 85311127165 |
